Test and Traceability Report
Summary
| ✅ | Test report | 100% |
| ✅ | Traceability report | 100% |
Test report
| Success | Failure | Skipped | Unknown | Total | |
|---|---|---|---|---|---|
| Tests | 2 | 0 | 0 | 0 | 2 |
Run tests
| Testsuite | Testcase | Check ID | Status | Log |
|---|---|---|---|---|
| tb_ecap5_dblinky | blinky | tb_ecap5_dblinky.blinky.01 | ✅ | |
| tb_ecap5_dblinky.blinky.02 | ✅ |
Traceability report
| Covered | Untraceable | Uncovered | Total | |
|---|---|---|---|---|
| Requirements | 2 | 1 | 0 | 3 |
Covered requirements
| Requirement | Description | Derived from | Covered by | Tested by | Test results |
|---|---|---|---|---|---|
| User Requirements | |||||
| U_BLINK_01 | ECAP5-DBLINKY shall alternatively toggle both of the user LEDs on the ECAP5-BSOM board every second. | tb_ecap5_dblinky.blinky.01 |
|
||
| U_BLINK_02 | ECAP5-DBLINKY shall alternatively toggle both of the user LEDs on the ECAP5-BCARRIER-XLITE board every second. | tb_ecap5_dblinky.blinky.02 |
|
||
Untraceable requirements
| Requirement | Description | Derived from | Justification |
|---|---|---|---|
| External Interface Requirements | |||
| I_CLK_01 | ECAP5-DBLINKY's outputs shall be registered on the rising edge of clk_i. | This requirement is covered by the hdl code. | |